Directions
By Car
The Riverside Hotel is located on the south-west side of Burton upon Trent. This is best reached via the A38, which runs between Derby and Birmingham.
From Derby:
- Take the A38 southbound, past the Toyota factory and on to Burton.
- Do not take the first exit to Burton upon Trent north but continue to the next exit, signposted Burton upon Trent and Branston.
- Take the exit and turn left at the island, then right at the traffic lights.
- Follow the road over the railway bridge, then take the next right.
- Take the 2nd left into Riverside Drive, which leads to the hotel.
From Birmingham:
- Take the A38 northbound past Lichfield and Barton-Under-Needwood. Turn off at the first exit for Burton upon Trent.
- Turn right at the island, then right again at the next island.
- Follow the road over the railway bridge then take the next right.
- Take the 2nd left into Riverside Drive, which leads to the hotel.
From A50 (links from M6 and Ml):
- Follow the A50 to junction 4, signposted Burton upon Trent (you will see a power station on the left-hand side), then take the A38 towards Burton.
- Follow directions as from Derby.
From the M42:
- Leave at junction 11 and join the A444 signposted Burton upon Trent.
- Keep on this road until it has passed over the River Trent, with a Tesco store at the end.
- At the roundabout, at the end of this bridge, turn left towards Branston.
- Follow this road for approximately 2 miles; under a small bridge and over a small island.
- You will see the road rise over a small bridge just as you enter a 30 mph zone.
- Turn left into Warren Lane, then take a 2nd left into Riverside Drive.
Check Availability | Top